Page 5 - Davenport Tooling Catalog

Basic HTML Version

Order:
586-465-5000
Fax:
586-465-3030
3
44725 TR INI TY DR I VE • CL INTON TOWNSH I P , MI 48038 USA • WWW. SLATERTOOLS .COM • D I RECT@SLATERTOOLS .COM
Adjustable Forming
Dovetail Tool Holder
Direct Mount
For use with 5/8” or 7/8” Model “B” Davenport
Forming dovetail toolholders use
dovetail-shape tooling. Tool sharpening
is quick and will not affect tool profile.
Order #
FDT-7535
Dovetail Size = 5/8”
second position
(“B”) rear slide
Order direct from the manufacturer
Order:
••••••••••••••••••••••••••••
586-465-5000
Fax:
•••••••••••••••••••••••••••••••••
5 8 6 - 4 6 5 - 3 0 3 0
e-mai l : direct@slatertools.com
Skiving Dovetail
Tool Holder
Shown with Mounting Block
For use with 5/8” or 7/8” Model “B” Davenport
Skiving dovetail holders are used with dovetail
tooling to obtain exceptionally smooth finishes.
Order # Mounting Block #
SDH-0110 STR-7110
Capacity = 3/4”
Dovetail Size = 5/8”
Mounting Diameter = 1”
Knurling
Tool Holder
Round Shank Type
For use with 5/8” or 7/8” Model “B” Davenport
Order # Mounting Block #
KTC-8420 KTB-7119
Capacity = 1/8” to 7/8”
Shank Diameter = 1”
Shaving Dovetail
Tool Holder
Round Shank Type
For use with 5/8” Model “B” Davenport
Order # Mounting Block #
SDT-7120 STB-7110
Capacity = 0” to 5/8”
Dovetail Size = 1/2”
Shank Diameter = 1”
Shaving Dovetail
Tool Holder
Round Shank Type
For use with 5/8” or 7/8” Model “B” Davenport
Order # Mounting Block #
SDT-7125 STB-7110
Capacity = 1/4” to 7/8”
Dovetail Size = 1/2”
Shank Diameter = 1”
FOR TECHNICAL DATA ON ALL TOOL HOLDERS AND BLOCKS REFER TO TABLE OF CONTENTS
Forming with Slater Tools
Keep in mind every job has its own unique conditions, and each condition calls for a different type of form tool. To form at the
tools full potential you need to familiarize yourself with several individual features of the application -shape of work, width and depth of cut, for rough forming or fin-
ishing operations, location of toolholder in relation to other tools in the set-up, type of material, speeds and feeds at which the work is done.
Circular
The circular form toolholders are especially suited for heavy roughing cuts. Highly efficient due to the ability to resharpen on the top - up to 270° of its
circumference.
Dovetail
This vertical toolholder can be used with either a narrow or wide tool for roughing or finishing cuts. Most commonly used for straight shoulder work
where a clearance angle has been ground on the tool. Generally popular because it adapts to several positions on the machine producing a variety of work.
Flat
Most useful for simple forming, grooving, facing, necking, and on work which does not require grinding a profile on the tool. Holds a clear advantage where
a dovetail or circular toolholder would be less practical.