Page 9 - Davenport Tooling Catalog

Basic HTML Version

Order:
586-465-5000
Fax:
586-465-3030
7
44725 TR INI TY DR I VE • CL INTON TOWNSH I P , MI 48038 USA • WWW. SLATERTOOLS .COM • D I RECT@SLATERTOOLS .COM
Shaving Dovetail
Tool Holder
Index Plate Mounting Type
For use with 5/8” Model “B” Davenport
Order #
SDT-7720
Capacity = 0” to 5/8”
Dovetail Size = 1/2”
Shaving Dovetail
Tool Holder
Index Plate Mounting Type
For use with 5/8” or 7/8” Model “B” Davenport
Order #
SDT-7725
Capacity = 1/4” to 7/8”
Dovetail Size = 1/2”
FOR TECHNICAL DATA ON ALL TOOL HOLDERS AND BLOCKS REFER TO TABLE OF CONTENTS
Skiving with Slater Tools.
Skiving tool holders from Slater Tools are for single & multiple spindle automatics and turret lathes. You can now make your
toughest cuts within seconds. Here are a few tips to keep in mind before beginning your application.
Front rake angle for a high speed steel tool - Front rake angle for a carbide tool -
Start with a 20
o
angle for steels (Max. 30
o
). Start with a 10
o
angle for steels (Max. 30
o
).
Start with a 15
o
angle for non -ferrous materials (Max. 25
o
). Start with a 15
o
angle for non-ferrous (Max. 25
o
).
Feed rates start at double form tool feed rate. Feed rates start at triple form tool feed rate.
Shaving Dovetail
Tool Holder
Round Shank Type (Slater Vertical Slide)
For use with 5/8” Model “B” Davenport
Order # Mounting Block #
SDT-7120 STB-7610
Capacity = 0” to 5/8”
Dovetail Size = 1/2”
Shank Diameter = 1”
Shaving Dovetail
Tool Holder
Round Shank Type (Slater Vertical Slide)
For use with 5/8” or 7/8” Model “B” Davenport
Order # Mounting Block #
SDT-7125 STB-7610
Capacity = 1/4” to 7/8”
Dovetail Size = 1/2”
Shank Diameter = 1”
Skiving Dovetail
Tool Holder
Round Shank Type (Slater Vertical Slide)
For use with 5/8” or 7/8” Model “B” Davenport
Skiving dovetail holders obtain exceptionally
smooth finishes.
Order # Mounting Block #
SDH-0110 STR-7610
Capacity = 3/4”
Dovetail Size = 5/8”
Mounting Diameter = 1”
Skiving Dovetail
Blanks
Hardened and Ground
Conversion for shaving blanks information
on page 31.
Shaving Dovetail
Blanks
Hardened and Ground
Shaving blanks information can be found
on page 35.