7600 - Small Swiss Type

Internal Adjustable Tool Holders

Tool Bore: .315 / Broaching Capacity:  .028-.375

 


STRAIGHT SHANK

TB TL BD BL BW BH Shank Dia. (in) Part #
.315 1.75 1.03 1.75 1.12 2.28 .625" 7600-1
.315 1.75 1.03 1.75 1.12 2.28 .750" 7600-2
.315 1.75 1.03 1.75 1.12 2.28 12mm 7600-12
.315 1.75 1.03 1.75 1.12 2.28 16mm 7600-16

MORSE TAPER

TB TL BD BL BW BH Morse Taper (MT) Part #
.315 1.75 1.03 1.75 1.12 2.28 #2 7600-52

This Adjustable Rotary Broaching Tool Holder is designed specifically for Swiss machines and other small machines where clearance is minimal. This broach holder can, however, be used on any size machine. It is ideal for producing MICRO forms and gives you the ability to center the holder right on your machine.

  • ​Designed for Swiss and other small machines where clearance is minimal
  • Recommended for rotary broaching small forms and shallow depths (i.e. MICRO forms)
  • Conveniently offered in different shank sizes for ease of adapting to different machines
  • Offered in both straight shank and morse taper
  • Compatible with Slater Tools' .315 shank diameter rotary broaches
  • Accepts rotary broaches with any custom overall length  
  • Recommended Average Rotary Broaching Capacity: .028-.375

Since this Rotary Broach Tool Holder is capable of being adjusted, it will need to be zeroed into the centerline of the workpiece. It is recommended to zero the Rotary Broach Tool Holder within .001 of the centerline or better.

End play of the Rotary Broach Tool Holder is typically .002/.003.

Use only synthetic grease (without graphite) with this Rotary Broach Tool Holder. Mobil 32 is an excellent grease that will prolong the life of your Rotary Broach Tool Holder, which is available from Slater Tools.

Replacement parts for each of our Rotary Broach Tool Holders are available from stock. Please call one of our helpful representatives for assistance.

  • All repair/replacement parts are available from stock for same day shipping.
  • Item numbers 5-8, 10 and 14 are included in bearing rebuild kits.
  • Item numbers 2-16 can be ordered as a sub-assembly.
  • Replenish synthetic grease after bearing replacement using Mobil-Temp 32 (Slater Tools Order # Mobil-32).
Tool Holder Series Rebuild Kit Order # Sub-Assembly Order #
7600 7600-BS1 07600-0
7700 7600-BS1 07700-0
1760 17600-BS1 17600-0
1770 17600-BS1 17700-0
3760 37600-BS1 37600-0
3770 37600-BS1 37700-0
7760 77600-BS1 77600-0
7770 77600-BS1 77700-0
7773 77600-BS1 77730-0

ORDER DIRECT

VIDEOS VIEW ALL

CATALOGS VIEW ALL