Slater Tools: Number one for Rotary Branding
Extra Large Form

Extra Large Form Tool Holder

This External Rotary Broaching Tool Holder can take on extra large external forms and provides the quality and accuracy Slater Tools is known for.
  • request a quote

  • Extra Large Form Tool Holder
    Extra Large Form

  • Broaching Capacity .875-1.50
  • Order: Refer to individual order numbers below
Extra Large Form Extra Large Form Mechanical Image
MD TL BD BL BW BH CL CD Shank Dia. (in)
 Order #
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 1.00" 7773-1
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 1.25" 7773-2
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 1.50" 7773-3
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 1.75" 7773-4
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 2.00" 7773-5

 

MD TL BD BL BW BH CL CD Morse Taper (MT)
 Order #
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 #3 7773-53
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 #4 7773-54
2.3125 1.75 3.12 3.95 2.62 4.38 1.25 .75 #5 7773-55

 

 

  • Designed for large machines where clearance is not an issue
  • Recommended for extra large forms and deeper depths
  • Compatible with Slater Tools' external broaches with a 2.3125 mounting diameter
  • Conveniently offered in different shank sizes for ease of adapting to different machines
  • Offered in both straight shank and morse taper
  • Recommended Average Broaching Capacity: .875-1.50

Since this holder is capable of being adjusted, it will need to be zeroed into the centerline of the workpiece. It is recommended to zero the holder within .001 of the centerline or better.

End play of the Tool Holder is typically .002/.003.

Use only synthetic grease (minus graphite) with this Rotary Broaching Tool Holder. Grease using Mobil 32, available from Slater Tools.

Replacement parts are available from stock. Please call one of our helpful sales representatives for assistance.